My sending units have gone out on both my tanks on a 95 200zx I have all the hoses removed from the port side tank and I can't get it out. It's crazy to have go to this much work to replace a sending unit. THANKS FOR ANY HELP
My sending units have gone out on both my tanks on a 95 200zx I have all the hoses removed from the port side tank and I can't get it out. It's crazy to have go to this much work to replace a sending unit. THANKS FOR ANY HELP
Are you saying you cant get the tank out or the sending unit out of the tank?
I can't get to sending unit without removing tank. Thanks
if your ZX200 is like the ZX225 I was just working on you can remove the top deck over the tanks. That part of the deck is held on by 4 screws to allow access to the tanks.
See if this looks like your back end of the boat
http://www.bbcboards.net/zerothread?id=758597
I wish mine was like that Mine is all fiberglass I seen where someone said the top cap may removed. Thats crazy just to replace fuel sending unit. Ihave all the hoses off and can't get it out. Thanks
Seems like I remember removing one of those once? Used a hoist and two come-a-longs. One on each side.
Had to jump up and down on it to get it back in.
I think the new secret color is "A-Rig"..........
I was able pry it out enough that i think I can get a new sending unit in. I guess they figured you won't ever need to replace it great planning!!!!!Thanks Did u lift the top cap off?
Reply With Quote