What have you added to your Skeeter after you bought it. Pictures if possible

[Foodeefish]

I just bought a 2006 Skeeter ZX190 with an Evinrude E-Tech 150.
What have you guys added to your Skeeter after you took ownership of it to make it more comfortable to fish out of?

[Neilslure]

5 bass in the livewell is a nice addition to make tournament days more comfortable.

[Rodney Bledsoe]

A recessed foot peddle tray, hot foot, up graded electronics, and a V-T2 for the live well lids.

Still working on that 5 fish in the live well thing

[Dando]

Padded entire front and rear decks.
Power-Pole
Re-Power to SHO
Hardwired the TM with a heavy duty battery on-off swith.
Got rid of that vinyl plastic bezel in the bow and replaced with aluminum. Mounted my graph and aftermarket switches to it, and in it.
Secured a measuring board to the rod locker lid. (it's always right there ready to use when needed).
Blinker trim (it didn't come with one and I like it)
Re-worked my bilge floor so it'd "hold a screw" (keeps batteries and stuff secure).
Shallow alumium battery trays.
Made small divider compatments for the front tackle compartment to separate soft plastics, and stuff.
Paddle holder under my running light holders in the not rod locker.
Torsion axles under the trailer (it had leaf springs).
Spare tire mount is an extra hub with bearings.
Re-wired/re-routed wiring and cables and added several of those things that supress interferance.
Little custom abs plastic deal for the trolling motor bounce stop to rest on.
Had stainless rails on the top cap, got rid of those...didn't like em.
Power pole is in the way of an E-ladder. So, I'm now re-fabricating an e-ladder for starboard side mounting.

[MD 20i]

gimmi another a week and i will have tons for you. i am working on mine right now. 2008 20i. here is a list im doing now.

1. removing Yamaha Command link gauges and replaceing with Lowrance LMF-400's that will be networked.
2. added ep-35 temp
3. added Lowrance engine interface cable.
4. adding the new Bobs Action jac 12" with LED gauge. the led gauge will go in the water pressure gauge spot.
5. added Blue water LED boat light package
6. lastly...deciding on either hds8 gen2 bundle or 2 - minnkota talon's

[Z518 Comanche]

Just bought an HDS-8 for the console and a 7 for the bow, with structure scan. Can't wait to get it from Brian @ BBG. Probably the next thing is a recessed tray for my TM pedal

[Young Gun]

HDS units and a TON of gasonline!

[Ranger391v]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Foodeefish &raquo;</td></tr><tr><td class="quote">I just bought a 2006 Skeeter ZX190 with an Evinrude E-Tech 150.
</td></tr></table>

Taking it you bought 'King of The Hill' 's boat??????? White/yellow.

What I've added to my '05 TZX 190/ 175 HPDI.
- replaced Maxxum 74lb --&gt; Minn Kota Fortrex 80lb
- replaced electronics --&gt; Lowrance LMS-520 and LMS-522 (networked)
- Powertech 24" TR04
- took rod rack out --&gt; Stick Jackets (and any other brand of the same thing)
- replaced rod tie downs --&gt; Red bungies from West Marine (Augusta)
- 90gph / 10micron Water/Fuel Seperator
- Transom Ratchet Buckles

[ZeroHour]

08 I class

Hydraulic Plate
Power Pole
Foretrex
Side Imaging Birds
LED Lighting
Wire loom all wires in rear compartment
who knows what else

[Meleagris1]

HB 1198 and had Mark Croxton work my T1 prop.