I think I am going to mount my LSS-1 transducer on my jackplate. How has everyone been running the cable out the back of the boat. I need some ideas. I have a real problem drilling holes in my boat.
I think I am going to mount my LSS-1 transducer on my jackplate. How has everyone been running the cable out the back of the boat. I need some ideas. I have a real problem drilling holes in my boat.
I had an existing hole where the ends of the rub rail meet that my temp sensor ran out of. I pulled out the temp sensor and used a sanding drum on a dremel to enlarge the hole.
.
Neil Eckberg- Cary, NC - 2008 Skeeter ZX250- 250 Yamaha SHO
Kerr Lake Ba$$hole
Mine has that also. Good idea. Thanks
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Neilslure »</td></tr><tr><td class="quote">I had an existing hole where the ends of the rub rail meet that my temp sensor ran out of. I pulled out the temp sensor and used a sanding drum on a dremel to enlarge the hole.</td></tr></table>
+1
Reply With Quote