Thread: Prop advice???

Results 1 to 2 of 2
  1. 11-14-2010, 04:00 PM #1
    vroomZX190
    vroomZX190 is offline
    Member
    Join Date
    Jul 2010
    Location
    Ottawa
    Posts
    14

    Prop advice???

    Anybody who is running or has run a 24p Raker 3blade on a Zx 190 w/ 150 Yamaha ox66? Looking for some feed back, Thanks.
    Currently running a 23m 59mph(gps) @6000rpm. Not sure on the exact pad height i'm running at. But had to lower the motor to reduce rpm's about 1/2" to keep them @ 6k.

    Thanks again.
    Reply With Quote Reply With Quote
  2. 21XDC
    21XDC is offline
    Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,414
    #2 11-14-2010, 06:05 PM

    Re: Prop advice??? (vroomZX190)

    The raker wont fit the yammie... Try a 23 tempest plus, 24 fury, 23 txp jacked up high.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Prop Advice
    By stanga in forum Bullet Boats
    Replies: 7
    Last Post: 02-20-2012, 03:38 PM
  2. '97 202 prop advice
    By Champ Guy in forum Champion Boats
    Replies: 10
    Last Post: 05-24-2011, 12:03 PM
  3. prop advice
    By dirtdemon in forum Bullet Boats
    Replies: 1
    Last Post: 08-02-2009, 03:49 PM
  4. Advice on new prop
    By mnbassman in forum Skeeter Boats
    Replies: 4
    Last Post: 06-04-2009, 11:43 AM
  5. need prop advice
    By dustin191 in forum Champion Boats
    Replies: 2
    Last Post: 04-27-2009, 01:20 PM