As we know they do not come with pump outs. So I'm wanting to add pumpouts to both livewells. I know the parts that are needed I'm just wanting to see where the thru hull fittings were placed at if you installed this on your boat.
As we know they do not come with pump outs. So I'm wanting to add pumpouts to both livewells. I know the parts that are needed I'm just wanting to see where the thru hull fittings were placed at if you installed this on your boat.
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
On my TZX 190 they are on the back of the boat where the bilge pump out and the gas filler openings are located.
The thing is on the SX models we have a splashwell. I was hoping someone done it so i can see where they put it at before i do mine.
YOU are not entitled to what I have earned!!!!!
YOU are not entitled to what I have earned!!!!!
Wished I could help ya ..... lord knows you've helped out a lot on here for others ....... I would tell ya where mine is, but ya'll roped that goat above
What about out the side? then you could 'hose' your buddy when you pull up to him at the club blast off in the morning ..... 1000gpm and a reduced hole diameter ought to be good for a few feet
Good Luck with your project ...... nothing like sticking your neck out ....... I'm about to do the same thing this weekend on a stereo/speakers in my truck. Never fooled with that kind of stuff before .... got to learn at some point.
'09 Ranger Z520 Silverado Edition / '09 Evinrude ETEC 250 HO
'15 Xpress HD16DBX / Merc 59ci
Thats cool. I was just trying to check and see what other might have done. I will put it on the side and was thinking next to the bilge discharge but there is all the wiring that runs there along with the two troll batteries. I believe that i'll stick it on the opposite side and will have no wires to run around. When i get it done i'll post pics on here.
YOU are not entitled to what I have earned!!!!!
Yea, I'm that way too ..... I don't like things rubbing or binding unless they absolutely have to ....... that's where naked wires, broke fittings, and holes in hoses tend to come from.
Good Luck.
'09 Ranger Z520 Silverado Edition / '09 Evinrude ETEC 250 HO
'15 Xpress HD16DBX / Merc 59ci
Hey FC, I did it the easy way, I sold my SX190 and bought a ZX225 that had them
$70 is a lot cheaper.
YOU are not entitled to what I have earned!!!!!
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by fishin couillon »</td></tr><tr><td class="quote">$70 is a lot cheaper.
Good point, but at least I didnt get my hands dirty doing the install
I've been trying to convince her for a USED ZX model and its not working.
YOU are not entitled to what I have earned!!!!!
Stamina is the key, keep asking until she's tired of you asking and just gives in
Reply With Quote