Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Feb 2008
    Location
    gonzales
    Posts
    8,898

    zx200w/ 200hpdi series 2

    i am posting this for a friend of mine. what should motor height be on this setup?
    20XRD COMP/300X

  2. Member
    Join Date
    Mar 2009
    Location
    Springfield
    Posts
    1,292
    #2

    Re: zx200w/ 200hpdi series 2 (bayou bullet 20xd)

    That would depend on the prop and jack plate he is useing. 3" below pad would be my starting point and move the motor up 1/4" at a time until you start loosing speed or water presure then drop it 1/8 to 1/4". That should put you pretty much right where you want to be.

    Ron S


  3. Member
    Join Date
    Feb 2008
    Location
    gonzales
    Posts
    8,898
    #3

    Re: zx200w/ 200hpdi series 2 (Ron S)

    its brand new and was set 1 1/2 below the pad from the dealership. 12" jackplate w/ 25 t1
    20XRD COMP/300X

Similar Threads

  1. 2000 200Hpdi
    By collins4 in forum Yamaha Motors - High Performance
    Replies: 8
    Last Post: 02-07-2012, 07:17 AM
  2. 200hpdi actin up again
    By SKEETERBUG1 in forum Yamaha Motors
    Replies: 7
    Last Post: 05-26-2008, 08:10 PM
  3. 04 200HPDI maintance ?
    By GOTITFISH in forum Yamaha Motors
    Replies: 1
    Last Post: 04-09-2006, 05:50 PM