I have a 2000 zx195 with 200 vmax-----I am the 2nd owner--The bilge works on manual but not on auto---took the rule 1500 auto pump out and cleaned and tested and works fine----bought a new rule float switch now I need to know the way to hook it all up because something is not right......pump has a brown + wire and black - wire, float pump has 2 grey wires----the boat has 3 constant + wires unpluged 2 red and 1 that says port bilge and then there is an unpluged ground---if anyone can help please post up! Also what fuses go in the 2 auto bildge spots...thanks