Thread: set help

Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Sep 2008
    Location
    bedford
    Posts
    34

    set up help

    whats the best setup for a skeeter TZX200 with a 200 HPDI on a 12 inch slidemaster jackplate with 25 pitch prop.like to have max speed


    Modified by skeeter05 at 4:47 AM 9/23/2008

  2. Member
    Join Date
    Jun 2007
    Location
    Opelika
    Posts
    1,487
    #2

    Re: set up help (skeeter05)

    I have a TZX190 with the 175HPDI and I have my prop/pad height set right about 2.5". I'm still playing with the jackplate and need to get my prop worked, but currently with a full load, full of fuel, 2 people, empty wells I'm running about 66.1 GPS at 5600RPMS with about 14PSI of water.
    Jeff Shepherd
    2005 Chevy Silverado 4X4 Quadrasteer
    2003 Skeeter TZX 190
    2003 Yamaha 175 HPDI

  3. Member
    Join Date
    Sep 2008
    Location
    bedford
    Posts
    34
    #3

    Re: set up help (deer0373)

    im got my boat set at 1"and 1/2 below pad and still have about 16 psi. im running 70 gps speed. but when i asked todd about set up he told me i need to 3" blow the pad. well that slow me down, or well i be the sweet spot and pic up more speed and less cradle rock.

  4. Member
    Join Date
    Mar 2008
    Location
    rayville
    Posts
    130
    #4

    Re: set up help (skeeter05)

    My boat is the same boat sort of just diff model # zx 195 and I run 2 and 1/2 below pad, same prop as you same motor same boat. 70.5MPH little to no walk, easy to drive out of.but I would start at 3 and go up 1/4 at a time. Just my opinion, and I am no boat pro.

  5. Member
    Join Date
    Sep 2008
    Location
    bedford
    Posts
    34
    #5

    Re: set up help (altobugman)

    thanks for your help i will try it this weekend