comfortroll foot pedal tray

[chuy]

Anybody install a trolling motor foot pedal tray
in a 05 tzx 200

[blackknife]

there's not a heck of a lot of difference between installing one in an 03 TZX190 (such as mine) or an 05 TZX200. you have to go through the same exact steps to install one. see my post if you haven't already. the only thing that will differ is the measurements, and possibly the spacing of the deck supports seeing as your boat is a foot longer. just measure at least 2" back from your bow control panel and you'll be fine. there WILL be a couple of fiberglass supports you will cut through, but it wasn't really a big deal for me. if you need any help, or advise shoot me a pm, I'd be happy to help. once you install one, you will be REALLY glad you did....personally I'd go with the Comfortroll over any of the others especially if you have a Minn Kota. The rounded back hugs the pedal so to speak.

http://www.bbcboards.net...59768

[USMC 1974]

I have installed them in My ZX200 the Neighbors 05 ZX 225 and I have also installed one in a ZX 250 and they are easy and just reguire alittle bit of Courage to cut a big whole in your deck No Really Very simple and the best thing since sliced bread for Back and leg issues while fishing long T's