Hi have a problem I have a 1992 ss140 skeeter with 1992 mariner 115 hp main motor also have a 1996 9.9 mariner for a kicker but not on boat there is not any room on transom for my kicker is there a kicker mount that anyone knows of that i can buy to make this work on my boat or offset kicker braket to get it away from main motor so can buy arm to steer from main motor and still need to buy controls because its a tiller on it now thanks everyone in advanced. thanks cindy
I've been curious about this as well. I'd love to put a 9.9 on my ZX190
Common Sense...so rare, it's kind of like a SUPER POWER!
Call Sean Wieda at Plapp's 859-647-1234. There is a guy in Indiana who makes a bracket out of 1/2 inch aluminum. You must install two longer bolts on the starboard side of your engine(the bolts that hold the engine on) The plate slips over the bolts and use regular nuts to secure it. Tou can take it on or off in a matter of seconds. I have had my for six years and had it on both Tritons and Skeeters. IF you do not have a jackplate he will make you a model with a offset to clear the sponsons on your Skeet..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Muddbugg »</TD></TR><TR><TD CLASS="quote">Call Sean Wieda at Plapp's 859-647-1234. There is a guy in Indiana who makes a bracket out of 1/2 inch aluminum. You must install two longer bolts on the starboard side of your engine(the bolts that hold the engine on) The plate slips over the bolts and use regular nuts to secure it. Tou can take it on or off in a matter of seconds. I have had my for six years and had it on both Tritons and Skeeters. IF you do not have a jackplate he will make you a model with a offset to clear the sponsons on your Skeet..</TD></TR></TABLE>
thanks mudd....could you say what it will cost...ballpark?
Five years ago he was getting about 350-450 for them depending on if they had the offset or not...
thanks again muddbugg.....I think this will have to be an off-season addition
Reply With Quote