2005 225 Etec HO, Set at TCW 3, Need to know which oil I shouls run? New to the Etec,
2005 225 Etec HO, Set at TCW 3, Need to know which oil I shouls run? New to the Etec,
He's gonna tell you XD100.
_________________________________________
96 Javelin 379SE 96 Johnson 150 (J150ELEDB)
Mods: FS carbs, Ficht reed cages, boyesen reeds and
Baker Hot Heads.
If it has 50 in it now do i have to drain or can I just mix the 2 together until it just become all 100. I know this is a dumb ? but I want to be sure to protect my investment.
They will mix, but I would run the 50 low then fill er up with the 100.
With your setting, you can use either oil. If you switch to XD-100, just run the tank down low, then add the new. No muss, no fuss.
-----
A Technical troubleshooter possessing more tools than talent !
No Fuss, No mess, with warranty issues?
If it was yours which would you use SEAHORSE
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MaverickPro203 »</TD></TR><TR><TD CLASS="quote">No Fuss, No mess, with warranty issues?
If it was yours which would you use SEAHORSE </TD></TR></TABLE>
No problem with warranty issues as long as an approved oil is used.
If it were mine, either XD 50 or XD 100 would be used, which ever was handy.
-----
A Technical troubleshooter possessing more tools than talent !
Reply With Quote
