Pics Of Bilge/Jackplate Area with 2 Power Pole Pumps along with Jackplate Pump

[Ranger Z522]

Could someone post pics of that area where you have mounted your 3 pumps (Bob's jackplate and 2 power pole) and have the water temp probe installed or has input please...looking at adding 2 power poles but after looking at my area with Bob's jackplate pump and temp probe already mounted ,don't think 2 extra pumps will fit... ...working with Rich on this too by the way...just was curious if anyone already has this done on Z522 (or Z Boats?) ...thanks in advance,Jim.

[scbass]

I have a Z521 2012 model and my 2 power pole pumps are located under the black cover under the splash well. I have an atlas jackplate and the pump is mounted on the jackplate itself. I would think there would be enough room under the splash well for all three pumps.

[Ranger Z522]

thanks scbass...since the temp probe is placed away from both walls, about 3" from side and 3" from transom,takes up some usable area...I'm lookin at about a 11 X 9 (approx.) floor area to place 2 pumps...

[CaymasRodney]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Ranger Z522 &raquo;</td></tr><tr><td class="quote">Could someone post pics of that area where you have mounted your 3 pumps (Bob's jackplate and 2 power pole) and have the water temp probe installed or has input please...looking at adding 2 power poles but after looking at my area with Bob's jackplate pump and temp probe already mounted ,don't think 2 extra pumps will fit... ...working with Rich on this too by the way...just was curious if anyone already has this done on Z522 (or Z Boats?) ...thanks in advance,Jim.</td></tr></table>

Yes sir it can be done but it is crowded, we have installed several back there in that back compartment, i have a Z520 at work with all three pumps and will send u pictures if u will drop me an email on Tuesday.

rodney@jetamarina.com

[Ranger Z522]

thanks Rodney....I'll send the email Tuesday sir..thanks...

[Lou r Pitcher]

Same problem on my Z with Bobs JP.....and not going to give up the dedicated space for spare prop. Solution was going to Talons as they have no bulky pumps/hoses to deal with.

[Ranger Z522]

TTT...

[CaymasRodney]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Ranger Z522 &raquo;</td></tr><tr><td class="quote">thanks Rodney....I'll send the email Tuesday sir..thanks... </td></tr></table>

That boat i was going to take pictures out of left lastweek but this is where we mount those pumps, like i said it is very crowded but they will work.

[Carlos H]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Lou r Pitcher &raquo;</td></tr><tr><td class="quote">Same problem on my Z with Bobs JP.....and not going to give up the dedicated space for spare prop. Solution was going to Talons as they have no bulky pumps/hoses to deal with.

</td></tr></table>

Jay, I put my Bobs pump behind the port side battery, no problemo! Fits well there.

[Ranger Z522]

IM'd ya RR...