Results 1 to 4 of 4
  1. #1
    Member masterbass's Avatar
    Join Date
    Aug 2009
    Location
    Plymouth
    Posts
    295

    thinking about getting the saw out

    i have a 2001 201 and I have been seriously thinking about cutting my passenger console out of the boat! i really dont want it in there anymore some guys say it will compromise the structure of the boat but i have a hard time beliving that. what do you guys think


    Modified by masterbass at 8:37 PM 3/12/2012

  2. Member
    Join Date
    Jul 2004
    Location
    Little Rock
    Posts
    953
    #2

    Re: thinking about getting the saw out (masterbass)

    Take a deep breath....drop the saw...and back away slowly....

    J/K....honestly, I've never considered the question before. But since some 201s came as single consoles, I would think it could work, but maybe there is something different about the construction of the duals that if you removed the passenger side, it wouldn't be the same as a made-from-the-start single console.

    At this point, you probably don't plan to sell the boat, but it might hurt the resale valve if you did try to sell. But maybe not if you can hide all the cut places & rough edges, etc. that you would have left with carpet and couldn't tell anything was removed.

  3. Member mr.lennyg's Avatar
    Join Date
    Apr 2008
    Location
    Kingman, Arizona
    Posts
    723
    #3

    Re: thinking about getting the saw out (masterbass)

    Sell it, get what you want but don't cut up the boat.

  4. Member TomM's Avatar
    Join Date
    Jun 2004
    Location
    Royersford, PA
    Posts
    2,326
    #4

    Re: thinking about getting the saw out (mr.lennyg)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by mr.lennyg &raquo;</td></tr><tr><td class="quote">Sell it, get what you want but don't cut up the boat. </td></tr></table>


    +1

    Tom

Similar Threads

  1. Thinking of a 618 with 150?
    By burleydark in forum Phoenix Boats
    Replies: 7
    Last Post: 03-05-2012, 05:33 PM
  2. what was this guy thinking!!
    By BIGCBAG in forum BBC Lounge
    Replies: 15
    Last Post: 01-05-2012, 02:43 AM
  3. Thinking about a 191...what do I need?
    By cjmartin315 in forum Legend Boats
    Replies: 7
    Last Post: 08-18-2011, 07:10 AM
  4. What Was I Thinking
    By bgibson53 in forum Texas Fishing
    Replies: 11
    Last Post: 07-20-2006, 05:30 PM