What were the fuel tanks made of?

[HDETERS]

Don at European Marine has my injectors, and says they are nasty. He asked me a question about the fuel tank in the boat as far as what it is made of (plastic, aluminum, or fiberglass). I was not sure. Does anyone know what a 1996 Champion Fishhunter 190 would have in it as far as what the fuel tank is made of. Thanks

[scotty34]

Most are plastic now, find the access plate for the gauge sender you can tell then. It should have a tag on it stating who made it along with capacity and test pressure.
Scott

[Bowhunter]

My keel tanks are both plastic... I'm sure your's are.. but as recmmended, pull the acess and review..

Take Care,

[Tx Champ]

Moeller was/is the OEM tank manufacturer. Their tanks are polyethylene.

[HDETERS]

Thanks, I wil pull to make sure

[DaveH]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by HDETERS &raquo;</td></tr><tr><td class="quote">Don at European Marine has my injectors, and says they are nasty. He asked me a question about the fuel tank in the boat as far as what it is made of (plastic, aluminum, or fiberglass). I was not sure. Does anyone know what a 1996 Champion Fishhunter 190 would have in it as far as what the fuel tank is made of. Thanks

</td></tr></table>

My 96 202 fuel tank was made by inca Molded products and I was able to get some parts for it last year, I needed the gasket for the sending unit after I pulled it out to inspect the tank for any fuming issues and to check the pickup srceen due to issues I was having with ethnol.
Here's the link. http://www.incaproducts.com/site/default.aspx