Had to get a new lower unit because of a rock! Got lower end replaced but my 25 t1 was backordered till may 20th. So to get back on the water I had to run a 25 fury. Not liking it at all. If anyone has done it let me know what you thought. I am 2 3/4 prop to pad with manual jackplate.
Last edited by Rainy Lake; 05-08-2015 at 01:25 PM.
Fury props like to run deeper than others. Try 3.0 below then go lower...
i sent you a PM too.
06
USN Retired
2020 Basscat Caracal
2020 Mercury 225 ProXS 4s
Go 3.5" at least
Nitro z21
Problem is that fury will not perform on that motor. Yamaha is a big gear case and crave larger diameter props and the fury is a 14" diameter. If you are wanting a backup I would look into a turbo fxp as it will run real close to a t1.
www.obsessioncustomtackle.com
I had a buddy send me a 25 t1 to get me by until my new one comes in. But this is a 25 t1 vented. Do ya think it will work better than the fury?
It will work if you can get out of the hole with it. Most four strokes like non-vented props.
Reply With Quote