Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Mar 2007
    Location
    Tavares
    Posts
    7

    Problems with 2006 Johnson 150

    First-Timer Here.

    I Have had major Idle/Starting problems since owning a 150 Johnson(2006) now a year old. It has been in the shop no less then 6 times and has never ran well at slow speeds.
    Dealer has adjusted timming/idle.. replaced choke..replaced key switch...and put in new oil pump as it went out also last year. Got it back from shop Friday and ran great Saturday. (850rpm at idle) it was always at 1200rpm. Today Sunday put it in went 1/4 mile and engine just died (shut down) while on plane. Never could get it re-started. Gas and oil bulbs were pumped and full.
    Dealer and I are childhood friends (Great people) but I'm getting irritated that I cannot rely on this motor and have to take it to the shop so often. Any suggestions I can give to the dealer as I am no mechanic.

    Boat Ranger 618VS
    2006 Johnson 150
    Model #J150GLSDE
    Ser # 05144198
    CE 02/2006

    Thanks in advance.

    Sam

  2. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #2

    Re: Problems with 2006 Johnson 150 (crappiesam)

    Welcome to the BBC.

    Please check your serial number as this one is incorrect.

  3. Member
    Join Date
    Mar 2007
    Location
    Tavares
    Posts
    7
    #3

    Re: Problems with 2006 Johnson 150 (RUSTY63)

    Rusty,

    Taken off motor sticker

    STURTEVANT, WI USA
    MOD. NO J150GLSDE
    SER. NO 05144198
    CE 02/2006 POWER MASS 111.9 KW
    168 KG

    STICKER ON OTHER SIDE
    ACN
    097 370 100
    BARCODE
    350350

    OPERATOR'S GUIDE (MANUAL)
    BARCODE 215694

    THANKS
    SAM

  4. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #4

    Re: Problems with 2006 Johnson 150 (crappiesam)

    Maybe I jotted it down wrong....Sorry.

    As you posted it has had a fuel pump and a key switch replaced.

    Has anyone checked the sync and link and cylinder head temp?

  5. Member
    Join Date
    Mar 2007
    Location
    Tavares
    Posts
    7
    #5

    Re: Problems with 2006 Johnson 150 (RUSTY63)

    Took it to dealer today and asked about the sync, link, cylinder head temp. They said they checked those last week . They cant understand why it would just die and shut down?
    Hope they can figure it out.

Similar Threads

  1. 2006 Evinrude E-tec problems
    By Waterworld in forum Evinrude/Johnson Motors
    Replies: 44
    Last Post: 01-10-2018, 11:41 AM
  2. 2006 250 hpdi problems
    By ajs32 in forum Yamaha Motors
    Replies: 2
    Last Post: 08-04-2010, 07:04 AM
  3. 2006 evinrude e-tec 175 hp fuel problems
    By marlyn in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 12-26-2009, 06:41 PM
  4. 2006 225 Pro XS idling problems...
    By Garza200ProXL225 in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 7
    Last Post: 02-08-2009, 06:36 PM
  5. 2006 F150 - any problems??
    By captianwh in forum Yamaha Motors
    Replies: 6
    Last Post: 07-06-2006, 08:08 PM