Water presssure for 225 HO ETEC

[fisheye58]

Trying to set up my new motor.- 07' 225 HO Etec.. Currently running 18lbs WP @ WOT. Is this acceptable---What is the Min. water pressure @ WOT???

[fishinski]

I run at 12 to 15 all the time you are fine with 18.

[luckystrike]

10 to 11psi Min.

[ShaftDilbert]

I was told not to fall below 15 psi @ WOT. I know for a FACT on mine if i run less than 14 for any length of time.... it goes right to safe mode. Gages etc do vary...

[fisheye58]

THANKS FOR THE INFO. This is what I needed!!!!!

[AB]

I was told the same (minimum 15psi). Mine is still running about 20-21psi..