TXP ot 4

[BEEZER]

Any of you guys with 200 or 225 2.5 ran a txp ot 4 on your rig 19 or 20 foot. What pitch did you run. I'm trying to decide on a fishing prop and pitch. All I have ran so far is a couple trophys and I can't run them as high as I want. Any info would help, maybe I should call Greg and get his opinion.

[Fear-This]

Dearjhn 19 ft Blazer 200 Xs with Tro 4 ..76 gps Smoke can help ya or Ge ..

[BEEZER]

a tro4 is fine 1-2 below the pad. But doesn't carry a load as well as a txp ot4 at 1 above. I've ran a 27 ot4 that was awesome, it was just too much pitch. The two props carry the boat different and I like the txp better.

[BassinBlazer]

Hey Fella's,

Do you know how a ot4 would compare to a tro4 on a 202/250 yamaha combo? Or has anyone ran a ot4 on that combo that you know of? I asked the comparison question on an earlier post, but didn't get much feedback. I appreciate any info you can give me.

[Vyper202]

The TRO4 wont run as well on the 202/250 HPDI...it doesnt like to be run at the engine height neccesary with the HDPI. They run fairly well on a 202/OX66 combo because the stock lower unit likes to be run 3/4 to an inch below the pad.
I have ran a 28p TRO4 on both combos....250 HPDI-250 OX66/202....

[BEEZER]

Can you say highjack! Get that YAMAHA crap off this thread, no one care's about a yamaha. This is a MERC question

[Fear-This]

I have the TR0 4 it's a ok prop for fishing 78 to 80 light. It suck out hole without holes drilled, then Plug.

[Fear-This]

Whats up VYPER . need hook up test some prop when gets cooler.

[JOHN202]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by BEEZER &raquo;</td></tr><tr><td class="quote">Can you say highjack! Get that YAMAHA crap off this thread, no one care's about a yamaha. This is a MERC question </td></tr></table>

This is the Blazer board, Don't care what motor anyone got i like to hear from everyone.

I wonder if you would care if a Yamaha passed you ??

[Fear-This]

Thats Smoke old 18 ft from Pit stop, Beez just playing not many have past that MINI ME when she holds together.

[JOHN202]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Fear-This &raquo;</td></tr><tr><td class="quote">Thats Smoke old 18 ft from Pit stop, Beez just playing not many have past that MINI ME when she holds together. </td></tr></table>

Yea i know he's pickin. They got a fella over yalls way that will pass it on its best day, and he's a member of the BBC...Just sayin..

[BEEZER]

There are plenty of boats that will out run mine. All I have is a bone stock promax no mods at all. I just want to fish and not worry about a motor anymore. I pulled the trigger on a 24 today I ran a 27 but only turned it 6200 and it sucked out of the hole. I loved the way it carried the boat with a load in it. I'm scared the 24 won't be stiff enough but everyone I talk to says they are real tight. So we will see.

[Vyper202]

Isnt it past your bedtime?

[JOHN202]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by BEEZER &raquo;</td></tr><tr><td class="quote">There are plenty of boats that will out run mine. All I have is a bone stock promax no mods at all. I just want to fish and not worry about a motor anymore. I pulled the trigger on a 24 today I ran a 27 but only turned it 6200 and it sucked out of the hole. I loved the way it carried the boat with a load in it. I'm scared the 24 won't be stiff enough but everyone I talk to says they are real tight. So we will see. </td></tr></table>

Yea i'm jus pokin fun at ya bro, always someone faster thas fo sho. The 24 should give ya more rpm's, but you may find the 25 to be better. Yes the props are stiff.That 24 is more like a 25. It may be just right for a heavy load during the summer months.

[BEEZER]

TOO late? Not this week. I don't have anyone to drag me to bed.

[Basswipe]

Beezer, were you on Harris SAT?

[Fear-This]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by BEEZER &raquo;</td></tr><tr><td class="quote">There are plenty of boats that will out run mine. All I have is a bone stock promax no mods at all. I just want to fish and not worry about a motor anymore. I pulled the trigger on a 24 today I ran a 27 but only turned it 6200 and it sucked out of the hole. I loved the way it carried the boat with a load in it. I'm scared the 24 won't be stiff enough but everyone I talk to says they are real tight. So we will see. </td></tr></table>Dang no more Mods Your daddy Ranger will out run you now.

[BEEZER]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Basswipe &raquo;</td></tr><tr><td class="quote">Beezer, were you on Harris SAT?</td></tr></table>

Yes sir that was me! I saw you in the back of no name in the trees. I ment to go say hey but I weighed in at 11:30 and forgot to go back to where you were.


Just because my motors stock doesn't mean it won't run. You can make an appointment with me FEAR to find out if you'd like "for a nominal fee"

[Basswipe]

I figured that was you. But your boat looked kind of long so I thought it may not be you. Plus I think that is a differant cowling since I've seen the boat last.

The motor sounds good.

[GE Blazer]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by BEEZER &raquo;</td></tr><tr><td class="quote">There are plenty of boats that will out run mine. All I have is a bone stock promax no mods at all. I just want to fish and not worry about a motor anymore. I pulled the trigger on a 24 today I ran a 27 but only turned it 6200 and it sucked out of the hole. I loved the way it carried the boat with a load in it. I'm scared the 24 won't be stiff enough but everyone I talk to says they are real tight. So we will see. </td></tr></table>

Beez...I think the 25 may be a little better on there. may turn too many rrr's with the 24.