Anyone else having this problem? My boat cover leaks and when it rains, ALL of my compartments get soaked. I hate it cause then I have to air dry them, and I cant keep anything in them cause it will get mildew or rust. Is there a way to solve this? Some of hte rubber hose used to stop the water is loose, but even on the compartments that it is all glued on are leaking. Help please!
TEAM TEXAS
Team Blazer 202 / Mercury 225 EFI
Had the same issue with my 97 202. The key is to make sure the boat is stored level side to side and back to front. The water will pond in the corners of the deck cap which have no drains and if the boat isn't level the water level will rise above the top of the seals and will seep between the rubber seal and the lid in stead of running the channel the lid lip sits in and draining to the floor drain. I poured two concrete pads for the rear wheels to sit on and made sure they were level with each other. Get the boat level side to side and maybe slightly sloping from bow to stern and leave the plug out. Hope this helps.
2015 Bullet 21XRS, 2021 250 Pro XS 4s - 3B014359
ok, I imagine the face that I leave it in my drive way that slopes down attributes to that, haha. I do prop it up on a cement block to help level it out, Maybe ill throw another block down there and see if that makes a difference.
TEAM TEXAS
Team Blazer 202 / Mercury 225 EFI
Reply With Quote