Who if anyone has installed one in their 210?? Going to make it one of the winter upgrades and curious as to brand I should buy or any info I may need ahead of time.
Who if anyone has installed one in their 210?? Going to make it one of the winter upgrades and curious as to brand I should buy or any info I may need ahead of time.
ray i did mine. i got the protray from jr at pitstop marine. nothing complicated about it, just measure then remeasure, then secure the template with 2 screws( i just screwed the template down to the deck since I was cutting it out anyway), mark it off with a sharpie and then cut the carpet or leave the template on the deck and use a razor knife to cut the carpet out, once the carpet is gone drill you a pilot hole and break out the jigsaw and go to town. remember to run a bead of silicone around the edges before you mount the tray down.
<FONT COLOR=\"red\">XB2003/300 PROMAX</FONT>
I help a buddy of mine put a comfortroll in his 190 a few weeks ago. had no problems with it.
I recently installed the Protray in my 202. It's not very difficult at all, only took about an hour and a half...Well worth the effort and the cost. I also purchased mine from Pitstop...Good luck.
Chris Dunn...Dallas, Ga.
2006 Blazer 202 / Yamaha 250hpdi
Sounds like pro tray is the choice to me. Just as well fix it up, cheaper then a new one
.
Ray,
I installed one bought on Ebay, made by a metal fabricator, the cost was only $36. unpainted. The first one only had 3" of depth, didn't work well for the minakotta but would work for the motoglide. I orderd a second well, this time with a 5" depth, powder coated and drilled the necessary holes and installed it. Looks great and works like a dream. If interested I can send you the email address of the seller. $36. is a great deal!
GB
I would really like to have that seller's info. I've been trying to figure which tray is smallest overall. Maybe this guy has what I need.
Do you still have the 3" one that didn't work for you?
Hello Chip,
Yes to both, the recessed well has been painted to match my Blazer, metal flake/blazer blue, this paint job is not powder coat and will easily remove with paint remover. I will email the seller for permission to put his info on this BBC. Or will email you the info necessary to reach the seller.
Regards,
GB
Reply With Quote