Results 1 to 9 of 9
  1. #1
    Member Brandon Gaylor's Avatar
    Join Date
    Dec 2009
    Location
    Oliver Springs, TN
    Posts
    326

    Sabre Humminbird 1198 Install

    For Christmas I got a Humminbird 1198 from myself and family for my 2007 Sabre. This past weekend my dad and I installed it. This was the hardest electronic install I have ever done. There is no room to mount this big of a graph on a Sabre, but with some redneck ingenuity we did it. My advice to anybody with a Sabre is to get a 8" screen graph or smaller with the normal 1.5" Ram mount so it can be mounted in front of the gear shift. With the 2.25" Ram mount and 1198 it is just too cramped. Now that its mounted, I love it and cant wait to take it to the lake. I also got the Navionics Platinum and from just playing with it at home its worth the extra money over Premium.



    Transducer mounted on jackplate. Drilled and tapped holes for it.



    Lowrance LMS-520c on bow. Mounted new transducer on trolling motor (instead of using factory mounted hull transducer that I hated).



    EZ-Troll Outdoors
    http://eztroll.com/
    BBC Sponsor and Made in The USA
    Power-Pole Dealer
    Bluewater LED Dealer

  2. zack birge
    Guest
    #2

    Re: Sabre Humminbird 1198 Install (Brandon Gaylor)

    Looks very good Brandon!!!

  3. Member
    Join Date
    Apr 2009
    Location
    Rome
    Posts
    8,086
    #3

    Re: Sabre Humminbird 1198 Install (Brandon Gaylor)

    Looks Good! My 1198 come off top right of console w/ ram mounted flush to face of console, I've been wanting to move smaller sonar to that spot and move my 1198 to right similar to the way yours is, just haven't got around to it .




  4. Member
    Join Date
    Jan 2008
    Location
    White House TN
    Posts
    6,462
    #4

    Re: Sabre Humminbird 1198 Install (cougarcat22)

    Very Nice
    Basscat!

  5. Member
    Join Date
    May 2010
    Location
    Berlin, WI
    Posts
    1,277
    #5

    Re: Sabre Humminbird 1198 Install (GRR884)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by GRR884 &raquo;</td></tr><tr><td class="quote">Very Nice </td></tr></table>

    What are you doing on the internet when you could be driving that PII instead??!!

    Nice job on the big screen mounting. Does it make the boat lean to the right? JK, very nice!

  6. Member Brandon Gaylor's Avatar
    Join Date
    Dec 2009
    Location
    Oliver Springs, TN
    Posts
    326
    #6

    Re: Sabre Humminbird 1198 Install (richs)

    Thanks everybody. I am going to go to the lake and try it out tomorrow.

    EZ-Troll Outdoors
    http://eztroll.com/
    BBC Sponsor and Made in The USA
    Power-Pole Dealer
    Bluewater LED Dealer

  7. Member
    Join Date
    Nov 2005
    Location
    Mooreville, MS
    Posts
    3,790
    #7

    Re: Sabre Humminbird 1198 Install (Brandon Gaylor)

    Where did you get the plate in the center of your dash? I need one like that to cover up some holes.

  8. Member
    Join Date
    Aug 2010
    Location
    Knoxville Tenn.
    Posts
    1,829
    #8

    Re: Sabre Humminbird 1198 Install (Brandon Gaylor)

    That looks good Brandon. Nice job.. You are getting that Sabre decked out

  9. Member Brandon Gaylor's Avatar
    Join Date
    Dec 2009
    Location
    Oliver Springs, TN
    Posts
    326
    #9

    Re: Sabre Humminbird 1198 Install (upscat)

    I made the plate out of a blank license plate. Cut it to fit and put the BCB sticker on it. Went to lake for about 3hrs yesterday. Only caught 1 fish, but the HB worked great.

    EZ-Troll Outdoors
    http://eztroll.com/
    BBC Sponsor and Made in The USA
    Power-Pole Dealer
    Bluewater LED Dealer

Similar Threads

  1. Humminbird install?
    By teamcobra2 in forum Skeeter Boats
    Replies: 4
    Last Post: 03-29-2010, 02:03 PM
  2. Humminbird system install in my 2+2
    By F150owner in forum Allison Boats
    Replies: 18
    Last Post: 11-15-2008, 06:17 PM