Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Sep 2004
    Location
    baltimore
    Posts
    223

    Evinrude tech ? from earlier post need help!

    here are my #'s first model E225FPLSIF sn#G04941238 year 10/2000,ok my earlier post explained the proplem I was idling back to the ramp about a mile at 2000rpm when the motor changed sound,sounded louder(weird)but seemed to run ok reved it up & contiued to ramp got to ramp shut it down it would not restart,ok check the plugs toady they were black,checked for spark ,none (the old way screw driver in boot to block ground) noticed the lift pump was leaking I heard this is a common proplem which causes hard starting which it has on cold start but it was not a big deal thought its just cold?turn key on to see if fuel pump runs it does but seems to stay on a while during power up,& does sound like its sucking air but why no spark does the computer need to see fuel pressure before allowing spark?I am a auto tech so I do know engine & computer fuel injected systems but have not worked on outboards.also how much does a lift pump cost I NEED TO FIGURE THIS OUT HAVE A TX SATURDAY PLEASE HELP WITH ANY INFO. will be indebted to you forever:)

  2. Member
    Join Date
    Sep 2004
    Location
    baltimore
    Posts
    223
    #2

    Re: Evinrude tech ? from earlier post need help! (greghall)

    also why would the engine change sound leaned out?went to rich?fouled plug?What should the fuel pressure be ?will check when I get my gauge at work tommorrow I noticed it has a shrader valve like what is on a tire not like the AN fitting on cars,also the lift pump, does it really pump there is no motor it or is it just a diafram that keeps pressure to main high pressure pump?alos is this the part # I need 5000885

  3. Member
    Join Date
    Sep 2004
    Location
    baltimore
    Posts
    223
    #3

    Re: Evinrude tech ? from earlier post need help! (greghall)

    Ordered my lift pump hope thats it fuel pressure goes to 25psi Then drops back to 5 psi after pump stops running.alot of air & not much fuel after I bleed off gauge.

Similar Threads

  1. Evinrude E-Tech
    By jp71291 in forum BBC Lounge
    Replies: 12
    Last Post: 03-23-2012, 10:22 AM
  2. Replies: 9
    Last Post: 02-26-2012, 06:04 PM
  3. Evinrude E-tech 225H.O.?????????
    By bassingaround in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 12-15-2010, 03:12 PM