Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Aug 2006
    Location
    Temple
    Posts
    93

    Water pressure on a Ficth

    Anyone no how much I need for a 99 225 at full throttle and what should it be at idle

  2. Member
    Join Date
    May 2006
    Location
    Murray, Ky
    Posts
    1,094
    #2

    Re: Water pressure on a Ficth (ksoskeeter)

    I have an 04 HO and it runs about 4 at idle and about 14 - 16 at WOT

  3. Moderator SEAHORSE's Avatar
    Join Date
    Jun 2004
    Posts
    9,638
    #3

    Re: Water pressure on a Ficth (ksoskeeter)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ksoskeeter &raquo;</TD></TR><TR><TD CLASS="quote">Anyone no how much I need for a 99 225 at full throttle and what should it be at idle</TD></TR></TABLE>

    2001 and later FICHTs used a low pressure high volume cooling system and thus the 14-16 psi at WOT.

    Your '99 225 used the older style high pressure system and I believe it should run around 25psi or better.
    -----


    A Technical troubleshooter possessing more tools than talent !

  4. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,135
    #4

    Re: Water pressure on a Ficth (SEAHORSE)

    Yep you can peg a 30 PSI gauge if you are low on the transom less than 18 is bad Juju. About 6-8 at idle.

  5. Member
    Join Date
    Aug 2006
    Location
    Temple
    Posts
    93
    #5

    Re: Water pressure on a Ficth (ChampioNman)

    This thing is on a Gambler 2200

  6. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,135
    #6

    Re: Water pressure on a Ficth (ksoskeeter)

    I'd keep it close to 18# min. WFO, change prop or lower the plate sumptin. Keep it 18#+.

Similar Threads

  1. "Water Pressure 101"- Poppet Valves and Variables with Water Pressure
    By EuropeanAM in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 61
    Last Post: 01-15-2021, 11:10 PM
  2. Replies: 6
    Last Post: 04-02-2012, 04:00 AM
  3. Replies: 9
    Last Post: 08-23-2010, 02:17 PM
  4. water pressure on 98 150 ficth engine
    By oldfishinfool in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 06-23-2008, 04:08 PM
  5. 98 johnson 150 ficth water pressure gauge
    By oldfishinfool in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 05-31-2008, 06:42 PM