Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Sep 2004
    Location
    adams run
    Posts
    105

    200 Venom lower unit

    Have 96 200 Venom and changed the gearcase oil 1 year ago with new OMC lube and noticed silver powder stuck to the magnet.......run the boat less than 55 hrs since and on the most recent lube change today noticed another buildup of silver powder on the magnet. Is a lower unit failure coming or is the acceptable?
    Any opinions appreciated

  2. Member
    Join Date
    Jun 2004
    Location
    Neenah
    Posts
    3,619
    #2

    Re: 200 Venom lower unit (brdr02)

    As long as it is just a fine powder, it is normal. If you have chunks, then lower unit service is in order.



    Modified \'92 Procraft 170 Combo/\'97 Johnson 130<U></U>

  3. Member
    Join Date
    Jun 2005
    Location
    Ottawa
    Posts
    449
    #3

    Re: 200 Venom lower unit (ProcraftMike)

    Mine( '94 200 Venom) look like a silver haired Marg Simpson. Hoping to get thru the season. Might be a good idea to have yours pressure tested. How oftendo you change the lube ?

  4. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,206
    #4

    Re: 200 Venom lower unit (1993392)

    Normal wear.

Similar Threads

  1. Lower unit for 1993 Johnson 225 Venom
    By wilsonlake in forum Evinrude/Johnson Motors
    Replies: 8
    Last Post: 10-27-2010, 05:18 AM
  2. lower unit help please 1998 200 venom
    By fishindude911 in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 07-26-2010, 08:15 AM
  3. 98 venom lower unit capacity
    By 2fish in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 11-29-2009, 08:43 AM
  4. 95 Johnson Venom 200 lower unit cost?
    By kistlerman in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 05-08-2009, 06:09 AM
  5. 1996 Johnson 200 Venom - Lower Unit Seals
    By Stratos86 in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 09-05-2007, 02:40 PM