Hi guys,
Have posted here before. 1998 175 Evinrude Ficht Model # 175FSXEC serial # 4439333 with pinned heads, software upgrade 5001212 with 167 hours.
When I shut the motor off in the downward position there is a series of oil that drips down from the motor and drains into the water. Is it normal for this to happen? My dealer said I should leave the motor in the downward position for a little while before lifting it up. He said that gives the oil time to drain back into the crankcase.
Also, The motor was only turning up to 4800 rpms. I reading some of the posts hear I was under the impression the motor would run better at around 5200 to 55oo rpms. So I changed the prop from a 15 x 17 to a 15 x 15. Hope this makes the motor last longer.
Thanks for the imput Chris