Hey guys, does anyone know if the 97 Prov 150 has the same carb bore as a 200 ProV?
Are they both 34mm?
Thanks
Hey guys, does anyone know if the 97 Prov 150 has the same carb bore as a 200 ProV?
Are they both 34mm?
Thanks
04 Triton TR21X, 23 SHO NIZPRO'd!!!
27p Croxton Razor 4
old rigs
95 BassCat Pantera II, 200 XRi Merc
97 Skeeter ZX185c
97 ProV150--KOTTMANIZED! 27M
No the 150 carbs are smaller.
Not the answer I am looking for jhl1965!!!!!!! But thanks!!!!
I am hoping they are the same bore! I do know that the older ones are in fact smaller, like around a 26mm bore.
I think all the newer carbs are 34mm.
Regardless of what the answers will be on here, I will have the opportunity to measure inside mine this up coming weekend!! Would just like to set my mind at ease for the time being!!
04 Triton TR21X, 23 SHO NIZPRO'd!!!
27p Croxton Razor 4
old rigs
95 BassCat Pantera II, 200 XRi Merc
97 Skeeter ZX185c
97 ProV150--KOTTMANIZED! 27M
I have a 1991 Pro-V 150 and have a set of 200 carbs sitting in the garage. I don't know the measurement, but the 200 carb throats are way bigger than the 150 carbs.
Tom![]()
I think you'll find they are nowhere near 34 mm.
04 Triton TR21X, 23 SHO NIZPRO'd!!!
27p Croxton Razor 4
old rigs
95 BassCat Pantera II, 200 XRi Merc
97 Skeeter ZX185c
97 ProV150--KOTTMANIZED! 27M
All ProV 150s before 1996 were 24mm, in 1996 they all became 32mm. The ProV 200 have always been 34mm along with the 225. The standard 200 and some 175 were 32mm.
Thanks Wayne. Would you know if all V6 exhaust dividers (under the coils) are the same? More specifically, the 89 Excell vs. the 97 ProV150?
04 Triton TR21X, 23 SHO NIZPRO'd!!!
27p Croxton Razor 4
old rigs
95 BassCat Pantera II, 200 XRi Merc
97 Skeeter ZX185c
97 ProV150--KOTTMANIZED! 27M