Results 1 to 3 of 3
  1. #1
    Member HaulinBass's Avatar
    Join Date
    Jun 2004
    Location
    Springfield
    Posts
    6,324

    2 ? for Matt or Wayne.

    Does it make a difference to run octane >89 with rec heads?
    The injector cleaning you offer any different than Brucatos cleaning matching?
    Larry Eby, 2004 ChampioN 188 Elite/2003 200 Hp Vmax OX66
    "Romans 10:9"

  2. Member
    Join Date
    Jan 2008
    Location
    Nixa, MO
    Posts
    424
    #2

    Re: 2 ? for Matt or Wayne. (HaulinBass)

    Larry -
    Yes, you should run AT LEAST 89 octane - but we would much rather you run 91 or higher with those heads.
    I am not sure about Brucato's cleaning service......I know they do very good work and have been doing it a long time. Ours is pretty simple - we flow test the injectors, ultrasonically clean them, back flush, and re-test them with new filters. We basically check the spray patterns, and flow rates to be within approx 5% of each other at 3 different test speeds (low speed, mid, and high - top end).
    Hope that answers your question.

  3. Member HaulinBass's Avatar
    Join Date
    Jun 2004
    Location
    Springfield
    Posts
    6,324
    #3

    Re: 2 ? for Matt or Wayne. (Mat_HT)

    Ran 91 octane today, much cheaper now. Ran quite well.
    Larry Eby, 2004 ChampioN 188 Elite/2003 200 Hp Vmax OX66
    "Romans 10:9"

Similar Threads

  1. Wayne, or Matt... Forgot what you told me!!
    By JacobsDad in forum Yamaha Motors - High Performance
    Replies: 3
    Last Post: 04-08-2011, 08:07 AM
  2. I've been talking to Wayne and Matt
    By MuleCat in forum Yamaha Motors - High Performance
    Replies: 2
    Last Post: 01-28-2010, 07:22 PM
  3. wayne or matt ?
    By lunker0477 in forum Yamaha Motors - High Performance
    Replies: 2
    Last Post: 08-26-2009, 12:29 PM
  4. Hey Wayne - Matt.........Ran a LW Flywheel
    By CGWright in forum Yamaha Motors - High Performance
    Replies: 1
    Last Post: 07-02-2009, 04:18 AM
  5. Matt or Wayne.
    By HaulinBass in forum Yamaha Motors - High Performance
    Replies: 2
    Last Post: 07-25-2008, 11:36 AM