Why does my L/U look so bad

[macinckirk]

The more I look at it it looks like its getting hot or making the color change and the top coat is going away

[GM482V]

You must be talking about the mid section? My 08 is doing it too.

[CGWright]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by macinckirk &raquo;</TD></TR><TR><TD CLASS="quote">The more I look at it it looks like its getting hot or making the color change and the top coat is going away</TD></TR></TABLE>

Is it a grayish discoloration?

[macinckirk]

Part of this looks like it was repainted allready and was not sanded right but also it looks like the clear coat is coming off and why is there 2 spots on both sides that are looking like its back to the primer??

If those area's were closer to were the water comes out I would say ok heat from the water, and I'm sure this is from heat but its right were I would think the shift is and should it be getting that hot?? or I'm i just guessing and its normal and all is fine











Thanks for any info motor has 55 hrs on it now but looked like this when I got it with 49hrs on it

[CGWright]

That looks like mine did. Mine was also on the gray paint. See the picture below. I think mine was a lot worse by the time I figured out what it was.

I took some LimeAway to it and it came off with a little elbow grease. It appears to have been some buildup of sediment in the water, and maybe from the heat it was cooked on.

I have it starting again and am going to try some C-L-R.

Let me know how you come out.