Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Mar 2009
    Location
    bay st louis
    Posts
    386

    different prop but same rpm

    i have a 27t and a 25t yamaha prop.can turn the 27 to 5600 and the 25 only goes 5600.speed is a little faster with the 27.should the 25 turn harder as it has less pitch?zx250,motor 3.75 below pad.both props like new.also notice when i press the gas pedal the last 3/4 of an inch it doesn't seem to make any difference.thanks

  2. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,288
    #2

    Re: different prop but same rpm (pnut)

    The T1 needs to run higher than the M... Or I might say the M needs to run lower than the T1 prop.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  3. Member Neilslure's Avatar
    Join Date
    Dec 2005
    Location
    Cary, NC
    Posts
    23,333
    #3

    Re: different prop but same rpm (21XDC)

    I have both running them on a 2008 ZX250. I get about 56-5700 of of the 27 and 5900-6000 with the 25. I dont know my prop to pad measurement but know it about 1/8" above where it was from the factory.
    .
    Neil Eckberg- Cary, NC - 2008 Skeeter ZX250- 250 Yamaha SHO

    Kerr Lake Ba$$hole

  4. Banned
    Join Date
    Jun 2004
    Location
    Apex, NC
    Posts
    4,828
    #4

    Re: different prop but same rpm (pnut)

    What boat and motor? The 25T will be good in hot weather and 27T is much better in cold. Seems like you need to go up on a JP to see better results.

  5. Member
    Join Date
    Mar 2009
    Location
    bay st louis
    Posts
    386
    #5

    Re: different prop but same rpm (pnut)

    thanks for the info.thinking about a hydraulic jack plate soon.i run the 25 in summer and the 27 in winter

Similar Threads

  1. Propco prop for eninrude for sale on prop forum
    By JegsCat in forum Evinrude/Johnson Motors
    Replies: 0
    Last Post: 05-13-2011, 10:49 AM
  2. Replies: 3
    Last Post: 09-25-2010, 04:58 AM
  3. Shooter prop vs Renegade prop
    By champ186dc in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 05-13-2010, 06:18 PM
  4. 2005 Mercury 200HP Optimax , New Fury Prop what is the correct Prop Nut Torque
    By GeorgeSantaRosa in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 3
    Last Post: 06-12-2009, 04:01 PM
  5. 1999 200 HP evinrude with stainless steel prop or aluminum prop
    By pvhtc in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 09-05-2005, 11:51 AM