Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    May 2007
    Location
    Ostrander
    Posts
    73

    1992 150Pro V Trim Problem

    My buddys trim is giving him problems. He trims the motor up fine but it will not stay up. I suggested Viagra but he didn't want to waste his supply. I had him check the fluid and it was fine. There are no visible leaks or funny noises associated either. Any suggestions on what to check for?
    Focus Focus Focus

  2. Member
    Join Date
    Mar 2010
    Location
    Bethel
    Posts
    4
    #2

    Re: 1992 150Pro V Trim Problem (JTD)

    I have 1994 Prov 150tlrr and the trim fluid has probably leaked out over time and he has lost pressure not allowing motor to stay tilted up.I have had to replace seals around both trim rods.Maybe he has water mixed in showin it has enough fluid but cant build up enought pressure to hold motor up.What did the fluid look like color wise? Just an idea.

  3. Member
    Join Date
    May 2007
    Location
    Ostrander
    Posts
    73
    #3

    Re: 1992 150Pro V Trim Problem (skeeterohio)

    Fluid looked good and fluid level was ok
    Focus Focus Focus

  4. NC Bass Club/Yamaha Motors Moderator BuzzB8's Avatar
    Join Date
    Jun 2004
    Location
    Asheboro, NC
    Posts
    7,090
    #4

    Re: 1992 150Pro V Trim Problem (JTD)

    It's probably leaking internally. Rebuilding would cure it.

Similar Threads

  1. 1992 Evinrude 120 fuel problem
    By hawkeyefan in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 05-30-2013, 06:43 PM
  2. 1992 pro v 150 problem?
    By Pitchin Black in forum Yamaha Motors
    Replies: 4
    Last Post: 08-11-2010, 05:59 PM
  3. 1992 evinrude 200xp problem
    By v8etr in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 08-31-2009, 07:35 AM
  4. 1992 150SS Problem
    By Fliptail Lizard in forum Suzuki Motors
    Replies: 8
    Last Post: 07-02-2007, 04:51 PM
  5. 1992 150 Johnson problem
    By khart14 in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 06-26-2007, 09:55 AM