I installed an engine interface cable a few months back, I can now see a digital readout of my RPMS on my Lowrance. Turning a 27 T-1 I can only turn it to like 5550 at best, have even tried several different heights. I tried a 26 Fury and only saw around 5650. I am wondering if my throttle needs adjusted.
Would this be as simple as moving the stop on the Hotfoot or would I have to make adjustment under the cowling somewhere?
.
Neil Eckberg- Cary, NC - 2008 Skeeter ZX250- 250 Yamaha SHO
Kerr Lake Ba$$hole
With your set up, I bet you just need a 25TXP..Or you might try this>> http://www.bbcboards.net...7-t-1
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
I run a 27 T1 VMAX prop on my 225 OX66 and turn 5800-6000 RPMs...
Everyone I know with ZX250 / 250 yami run a 25 pitch...Check the throttle plates and if they are opening all the way, then the throttle is fine...Think you are just over pitched...
Reply With Quote
.jpg)
