Fuel Pump Bolt Torque Specifications

[bang2568]

I replaced the fuel pumps on my 2003 VMAX 150 HPDI today. The bolts securing the fuel pumps were not very tight. I was able to remove them with light pressure with a nut driver. I want to make sure that I tighten them correctly.

I am worried that they were not torqued correctly when they were initially installed. What are the torque specifications for the bolts?

Thanks in advance,

Todd

[BuzzB8]

I'm getting this from the OX66 manual, so it may not be perfect.

On 8mm nuts (M5 bolts), 3.6 ft. pds.
On 10mm nuts (M6 bolts), 5.8 ft. pds.

[JUST-IN-TIME]

use a tap and clean up the holes first!