Results 1 to 2 of 2
  1. #1
    Member lunker0477's Avatar
    Join Date
    Apr 2008
    Location
    erie pa
    Posts
    407

    1996 pro v 200 need help

    today was out fishing running at 4500 rpm when motor sort of lost power like it was running out of fuel then it straghenten out and seemed like it was fine untill latter on in day was ideling through no wake zone went to get up on plane and it wouldnt go past 2100rpms .starts to stumble and just blubbers when you try.tryed squezzing primer ball no difference.starts fine idles fine.came home changed water seperator cleaned fuel filter no difference.tore fuel pumps apart everything looked fine(diaphrams not tore or ripped)compression seemed fine didnt have gauge to check but pulled plugs and put finger over hole and they all felt the same(check tommorrow with gauge)plugs looked a liitle wet and dark.carbs were rebuilt last sept.does anybody know what kind of compression it should have .any help greatly appreciated.

  2. Member lunker0477's Avatar
    Join Date
    Apr 2008
    Location
    erie pa
    Posts
    407
    #2

    Re: 1996 pro v 200 need help (lunker0477)

    ttt

Similar Threads

  1. Set Up on 1996 295/1996 200ph carb Rude
    By mtdrop in forum Stratos/Javelin Boats
    Replies: 1
    Last Post: 08-03-2009, 04:01 PM
  2. best plugs to use in 1996 225 venom and a 1996 175 Intruder
    By BigB in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 02-15-2009, 04:13 PM
  3. Replies: 10
    Last Post: 08-09-2007, 06:38 AM
  4. Max RPM for a 1996 130 V4?
    By Snake Boy in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 06-22-2007, 06:16 AM
  5. 1996 17 foot Cajun w/ 90 HP Johnson 2 stroke (1996)
    By billwright2 in forum Cajun Boats
    Replies: 4
    Last Post: 10-27-2005, 06:03 PM