Why does the O2 sensor on my 03 225 OX66 need to be cleaned every 20 to 30 hrs?
I use ring free with every fill up and only burn Chevron Gas I just had a new one installed last summer the old one bit the dust.
Why does the O2 sensor on my 03 225 OX66 need to be cleaned every 20 to 30 hrs?
I use ring free with every fill up and only burn Chevron Gas I just had a new one installed last summer the old one bit the dust.
Does it use an excessive amount of oil? you may need to adjust the oil pump linkage. I cleaned my o2 about 3 years ago. I have checked it 3 times since and it has been clean everytime. I run seafoam or ringfree in every tank..
What are the symptoms of a dirty O2 sensor? I have only approx 88 hours on motor. It had 42 when I bought it a year ago. Wanting to know if I need to change it. Thanks.
2005 G3 HP200 DC with 200hp V-MAX OX66
68.8 gps at 5600 rpm best speed yet
Dont run anything higher than 89 octane,dealer and a bunch of BBCERS told me that and have had no problems since.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Liplander »</TD></TR><TR><TD CLASS="quote">Why does the O2 sensor on my 03 225 OX66 need to be cleaned every 20 to 30 hrs?
I use ring free with every fill up and only burn Chevron Gas I just had a new one installed last summer the old one bit the dust.
Because you are using Ringfree. Clean the sensor and start using SeaFoam. I also tried RIngfree and IMHO, it is junk compared to SeaFoam. I have never had another O2 sensor problem since I started using the Seafoam.
Benjamin Franklin, 1759 - "Democracy is two wolves and a lamb voting what to have for lunch. Liberty is a well armed lamb contesting the vote."
Reply With Quote
