I have a 01 zx225 that I am needing to put a water separator filter on. It has 4 batteries and the oil tank in the rear. Where is there enough room to mount the base for a 90 gph filter? I may be overlooking it but with the compartment full of batteries I can't find a spot.
You may have to get creative but most I think are mounted on the inside wall of the transom. You might try asking in the skeeter ? forum
Mike
In Memory of Michael
Fantastic Father and Loving Son
A true man at 23 years old
"What was once a great country has been mortgaged and bankrupted by the egos and ethics of career politicians."
Yamaha sell two different filter lengths for the same diameter filter base. If space is an issue. Should be standard rigging for all Yams
Larry Eby, 2004 ChampioN 188 Elite/2003 200 Hp Vmax OX66
"Romans 10:9"
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HaulinBass »</TD></TR><TR><TD CLASS="quote">Yamaha sell two different filter lengths for the same diameter filter base. If space is an issue. Should be standard rigging for all Yams</TD></TR></TABLE>
The mini 10 and the longer filter (90 gph)do not fit the same size base. I just ran into this problem last week.
Mike
In Memory of Michael
Fantastic Father and Loving Son
A true man at 23 years old
"What was once a great country has been mortgaged and bankrupted by the egos and ethics of career politicians."
Mini 10 won't handle the amount of fuel needed for a 225.......
Sorry, was at HT yesterday, they had two different lengths for the same base according to parts department. Bought the longer one as it's a direct replacement for the one I have. Didn't know there was a diff diameter.
Check the side of the can for gph rating. The longer one (blue) is 90 gph, with 10 micron filtration. Didn't open the box on the shorter white can. You certainly don't want a lean condition.
Larry Eby, 2004 ChampioN 188 Elite/2003 200 Hp Vmax OX66
"Romans 10:9"
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HaulinBass »</TD></TR><TR><TD CLASS="quote">Sorry, was at HT yesterday, they had two different lengths for the same base according to parts department. Bought the longer one as it's a direct replacement for the one I have. Didn't know there was a diff diameter.
Check the side of the can for gph rating. The longer one (blue) is 90 gph, with 10 micron filtration. Didn't open the box on the shorter white can. You certainly don't want a lean condition.</TD></TR></TABLE>
Thats ok, my dealer didn't know the differance either.
Mike
In Memory of Michael
Fantastic Father and Loving Son
A true man at 23 years old
"What was once a great country has been mortgaged and bankrupted by the egos and ethics of career politicians."
THANKS, I may have to take it to my dealer and let them find out what will work.
For some reason i think that they have the 90 gph and the 60 gph. The 60 is the smaller of the two but it's not the "mini" either. Someone correct me on that if it's not right.
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
Reply With Quote