Complete controls for a 2002 Evinrude 225HO

[JR250SHO]

I am rigging a 2002 Evinrude 225HO. I need part numbers for the complete controls (wire harness, flush shifter, ignition w/ kill switch, any gauge harness, oil tank, etc...). Thanks

[bighare]

go here
Go to: http://www.evinrude.com/en-US/...n.htm then click on ENGINE DIAGRAMS.

everything is there under OB accessories

[RUSTY63]

Or....see your local dealer.

[JR250SHO]

I saw the site but it is a bit confusing. I was hoping someone on here would know the kits I need. I got part numbers for the oil tank, flush controls and battery cables but I need the rest, harness for system check, ignition with kill, warning buzzer and anything else I might be missing. What I can't figure out is what else is need. A lot of the kits have common parts.

I have little to no confidence in my local Evinrude dealer. Not that he is an incompetent dealer, but self admittedly, he doesn't sell enough big motors to know much about them. Any help would be appreciated.

[JoeBro44]

Jesse, try Doug up at Davenport Marine.

[MigAz]

jr222ho: I have a oil tank for that set up. It's clean....Check your Instant Messages.




Modified by MigAz at 9:02 PM 2/27/2006

[JR250SHO]

didn't get you IM, my email is jrpromax@hotmail.com

[MigAz]

Jr: You got mail!