Thread: hydrotec?

Results 1 to 14 of 14
  1. #1
    Member
    Join Date
    Oct 2005
    Location
    nampa
    Posts
    781

    hydrotec?

    i am trying to justify a phaze 2 kit to my self so guys can you give me some real life input as to what kind of mphs i will gain...thanks

  2. Member skeeter202's Avatar
    Join Date
    Jan 2005
    Location
    Hurt
    Posts
    1,406
    #2

    Re: hydrotec? (zx210)

    I picked up about 5 mph and have not re adjusted my plate . I put the heads and reeds in mine saturday . picked up 500 rs and now I just need to get them efficienntly in the water . I went phase one . I figure the block is a big job to tackle but the rest is a breeze if you go phase 2 . good luck

  3. Member
    Join Date
    Oct 2005
    Location
    nampa
    Posts
    781
    #3

    Re: hydrotec? (skeeter202)

    5!!!! that sounds great! what combo are you running?

  4. Member skeeter202's Avatar
    Join Date
    Jan 2005
    Location
    Hurt
    Posts
    1,406
    #4

    Re: hydrotec? (zx210)

    zx 202 c with a 24 tro 4 . I have a little skip that was there before , I think maybe a pin hole in a fuel line . I called Nathan at h/t , by the way super nice guy , supposed to give you around 40 hp . instant holeshot , now just need to do the tweaking on the 200 ox66

  5. Member
    Join Date
    Sep 2005
    Location
    anniston Al
    Posts
    1,322
    #5

    Re: hydrotec? (skeeter202)

    Can you still run 87 octane with the new heads? 5 mph is a pretty good gain. congrats on a job well done.

  6. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,399
    #6

    Re: hydrotec? (tr21alabama)

    I believe you need to run 89 octane gas with their hot heads. They have hotter heads and then you need more octane

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  7. Member
    Join Date
    Jun 2004
    Location
    Dunedin
    Posts
    466
    #7

    Re: hydrotec? (zx210)

    I pickup about 5 and have only played with jackplate.. still need to try props.. the biggest bang I think with the stage 2 is the midrange.. it goes 50 to 70 real quick.. the hole shot is not much better if any at all. the tuner takes away the low end power... its all mid and more horses and that = 1 pitch up or more rpms.. thats all.. its worth the money..



    Paul Calvert
    Palm Harbor Florida

    2007 Blazer 210DC Pro-v w/ 2010 Mercury OptiMax 300xs
    \"Saving Gas and Hauling Azz\" 89.3mph GPS

  8. Member
    Join Date
    Oct 2005
    Location
    nampa
    Posts
    781
    #8

    Re: hydrotec? (bassitup)

    i can really gain 5 mphs seems like alot!

  9. #9

    Re: hydrotec? (zx210)

    will it make a Z21 gain 5mph? this dang thing is slow after having a blazer!!!!!

  10. Member
    Join Date
    Jun 2005
    Location
    Smyrna Ga
    Posts
    86
    #10

    Re: hydrotec? (bass cowboy)

    I too would like to know if this kit would push a big heavy hull like a Z21 faster. Also, do these kits effect the warranty any at all, and lastly does anyone know the true prop horsepower on a 2006 250HPDI. I know the Merc 250XS is supposedly putting out 275 at the prop which is the maximum 10% allowed. Thanks in advance.

  11. Member
    Join Date
    Nov 2005
    Location
    murfreesboro
    Posts
    47
    #11

    Re: hydrotec? (GaBasser21)

    call nathan at hydrotec he or jon can answear all your questions supper nice fellows to deal with

  12. Member
    Join Date
    Aug 2004
    Location
    Chapel Hill
    Posts
    1,124
    #12

    Re: hydrotec? (xb02vmax)

    i am pretty sure the 250hpdi puts out around 270h.p.




    BLAZERMAN
    202DC 250HPDI

  13. Member kk4iz's Avatar
    Join Date
    Jun 2004
    Location
    Clanton, AL
    Posts
    4,352
    #13

    Re: hydrotec? (blazerman)

    I hope it does still playing with props


    12 lbs 9 oz caught on 4/28/1975 Lake Eufaula

  14. Member
    Join Date
    Sep 2007
    Location
    Markstay
    Posts
    2
    #14

    Re: hydrotec? (blazerman)

    hey, i got a 250hpdi on a 21 lund pro-v. looking at trying a phase 2 kit. Ever get to try one.

Similar Threads

  1. HydroTec ..... how do you know???
    By Ranger391v in forum Yamaha Motors - High Performance
    Replies: 4
    Last Post: 09-19-2009, 06:23 PM
  2. Hydrotec?
    By frank od in forum Yamaha Motors - High Performance
    Replies: 8
    Last Post: 04-14-2009, 01:41 PM
  3. Thank you Hydrotec
    By jawjerkr in forum Yamaha Motors - High Performance
    Replies: 5
    Last Post: 04-10-2009, 03:01 PM
  4. Hydrotec pro's and con's /
    By Chuck_NJ in forum Yamaha Motors
    Replies: 5
    Last Post: 03-21-2006, 07:52 AM