Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Mar 2006
    Location
    forest
    Posts
    12

    water pressure 150 prov

    new to bbc!! Recently purcased my 1st glass boat 97 skeeter zx185c w/prov150 it has a water pressure gauge an I know very little about water pressure in an outboard other than it cools the thing What kind of pressure readings should I be seeing?

  2. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,407
    #2

    Re: water pressure 150 prov (evskeeter1)

    Min of 13lbs to be safe at wide open throttle. Great fishing boat... Fast motor too. I bet your motor needs jacked up like most. They come deep from the factory. You need a 24p TRO4.... You'll like it alot.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  3. Member
    Join Date
    Mar 2006
    Location
    forest
    Posts
    12
    #3

    Re: water pressure 150 prov (21XDC)

    Thanks 21XDC I was reading 15,16lbs yesterday at wot. Once I get a replacement antenna cable for my gps I'll know my exact speed. The speedometer read 72 yestersday with just me 1/2 tank fuel empty livewells and I know its way off I'm guessing somewhere between 60-63mph

  4. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,407
    #4

    Re: water pressure 150 prov (evskeeter1)

    I bet it's faster than that... The 1997 150's were strong motors. Take care of it and she'll go a long way.. Make sure you run ring free or seafoam in every gallon and shock treat it 1-2 times a year.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

Similar Threads

  1. "Water Pressure 101"- Poppet Valves and Variables with Water Pressure
    By EuropeanAM in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 61
    Last Post: 01-15-2021, 11:10 PM
  2. 97 proV 150 water psi / carbs
    By Skeeter97 in forum Yamaha Motors
    Replies: 0
    Last Post: 03-19-2012, 06:45 AM
  3. water temp guage 96 yamaha 200 proV- 97 champion 202 ?
    By Knoxmandan in forum Yamaha Motors
    Replies: 0
    Last Post: 10-17-2010, 07:18 PM
  4. 90 yammy prov 150 ,water/fuel seperator question???
    By basshole45 in forum Yamaha Motors
    Replies: 2
    Last Post: 01-22-2009, 08:46 PM
  5. Water pressure hook up 87 ProV 200
    By BASSNAM2PM in forum Yamaha Motors
    Replies: 2
    Last Post: 06-15-2006, 06:57 PM