I'm just wondering if anybody has them on here, sure seems pretty quiet on here in this board. I'm looking for a service manual for a df90 though if anyone has any leads
I'm just wondering if anybody has them on here, sure seems pretty quiet on here in this board. I'm looking for a service manual for a df90 though if anyone has any leads
Every day i check this board to see if there is anything going on in the zuki side and nothing.
I don't think there are alot of suzuki's out there..compared to others BUT the good side is they must be running great!
I would like to hear some input on the 250SS Suzuki
Joe Galada - Tamaqua, PA
2004 Ranger 521VX - Yamaha 250 SHO
http://store.brownspoint.com/suzuki_page_05.asp
Great people to deal with. I have a 1988 dt 115,that has never been apart, on a allison bass boat.The prop shaft is out of round about 1/8 inch. The charging system is toast. I change the lower oil,fuel filters,spark plugs and water pump. I run the snot out of it all the time. It just keeps going and going.
what year
i have from 88-2004
2003 df90 4 stroke
hold on im up loading the manual
That would be awesome
https://www.yousendit.com/tran...0E9PQ
password
Thanks your the best
I'm glad even though we don't say much on the suzuki side we still can get help
I have a 115 2008 on the 23ft landau tri toon. does about 30 by gps. I have not had any problems. Did get a compliment this weekend, that it the most quite running motor they heard. Been thinking of getting a better prop. Anyone know where I can get a stainless?![]()
![]()
![]()
I would look on ebay there are a couple there, also browns point marine has great prices, all there stuff is factory
Because we don't have any issues to talk about.
Hey guys I'm new to the board. I was starting to think I was one of the last people running an older Suzuki out there. Mine is an 1987 150ss. I have it on a 1989 Ranger 363V that I bought new in 1990. I'm originaly from Rhode Island and have a hard time having it serviced out here in Kentucky. I'm not sure if it is the engine or my New England accent! I have had to learn to do all the minor pm stuff myself. The engine still runs strong, but, I'm thinking of selling my boat for some thing newer. I was thinking of cashing in my 401k, oh wait that's now gone. Any way I look forward to checking in here and seeing what you guys are talking about. Thanks
hi everone i bought a 96 896 savage with a 92 dt200 suzuki on ran it all spring ran great i have the owners Manuel on it and its in the garage right now and im just doing the pm on it found a great site if you need parts for any suzuki it's http://store.brownspoint.com/dt200/2008797.asp it breaks the motor down on a micro fish view and even tells you the price any seal bolt what ever you can think of any way hope that helps some body. knock on wood hope no body needs it lol nsdq.![]()
![]()
Modified by chopper289 at 1:35 PM 1/18/2009
hi all , I bought my boat last spring it's a 96 896 nitro with a 92 Suzuki on it the boat ran strong all last year and is now im my garage iv just got done doing all the PM stuff on it and decided to repaint the cowl and put my own graphis on. maybe one of you out there can help me right now I only have 2 gages working the tack and the oil light the counsol has all the outher gages in it but I don't think they are hooked up or are not conpatable with this engine do I need to buy Suzuki gages and is hard to hook them up my self or dose a shop need to do that thanks all scott
Modified by chopper289 at 1:35 PM 1/18/2009
I never get any help so I don't waist my time