Results 1 to 9 of 9
  1. #1
    Member
    Join Date
    Jul 2009
    Location
    Oshkosh
    Posts
    266

    Solid Core VS Carbon Core Spark plug wires

    Which ones are better ? to be use on a merc 2.5, 200, carb ponny ?

    On my Pro Marine set ( looking at the center of the cable adn it's a carbon core ) I check the continuity of those cables (6ea.)with my multimeter and
    there was no BEEP at the tester.

    I'm thinking if a set of Solid Core would produce a better spark ??!!

    Thanks,
    Boat Doctor

  2. Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    98,315
    #2

    Re: Solid Core VS Carbon Core Spark plug wires (boatdoctor)

    Type of plug wire utilized (or recommended) will vary, based on the ignition system type used.

    In some cases (such as CDM ignition), a semi-conductor plug wire will result in a STRONGER spark.

    Not recommended that wires be changed to a different design, as it may result in excessive strain on the ignition system, and/or altered firing (potentially resulting in pre-ignition or detonation).

    Engine serial number is the BEST identifier for the appropriate plug wires.




    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor

  3. Member
    Join Date
    Jul 2009
    Location
    Oshkosh
    Posts
    266
    #3

    Re: Solid Core VS Carbon Core Spark plug wires (EuropeanAM)

    It's a MERC 2.5 , 200 hp, 1993 , carb, 16 amps engine .

  4. Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    98,315
    #4

    Re: Solid Core VS Carbon Core Spark plug wires (boatdoctor)

    I do NOT recommend semi-conductor wires for ADI ignition engines.

    The correct plug wire kit is Part# 813715A9




    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor

  5. Member
    Join Date
    Jul 2009
    Location
    Oshkosh
    Posts
    266
    #5

    Re: Solid Core VS Carbon Core Spark plug wires (EuropeanAM)

    Opssss. !!!!.... What´s a "semi-conductor" wires ?

    Solid Core or Carbon Inner Core ???

    Boat Doc

  6. Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    98,315
    #6

    Re: Solid Core VS Carbon Core Spark plug wires (boatdoctor)

    "Carbon Inner Core" is a "Semiconductor".




    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor

  7. Member
    Join Date
    Jul 2009
    Location
    Oshkosh
    Posts
    266
    #7

    Re: Solid Core VS Carbon Core Spark plug wires (EuropeanAM)

    Why ADI ignition preffer the Solid Core wires ?? Due to RFI ??

    Today, most aftermarket ignition wires are made with a Ferrite inner core wire, not copper or stainless core like the OMC´s ones

  8. Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    98,315
    #8

    Re: Solid Core VS Carbon Core Spark plug wires (boatdoctor)

    Semi-conductor wires provide additional resistance (as their name implies).

    This can (to a certain point) result in a stronger spark at the spark plug.

    However.... the output of the coil must be taken into account also.

    ADI ignition is a Mercury design (specifically)- and although many use semiconductor wires (aftermarket)- it's best to retain the designed wires (and intended resistance values) unless there is a modification that REQUIRES some variance to enable a proper burn of fuel.

    Additional resistance in the plug wire can cause undue stress to the ignition system... much like using an incorrect, or improperly gapped spark plug.




    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor

  9. Member
    Join Date
    Jul 2009
    Location
    Oshkosh
    Posts
    266
    #9

    Re: Solid Core VS Carbon Core Spark plug wires (EuropeanAM)

    Thanks !!

    Boat Doc

Similar Threads

  1. Spark plug wires
    By BigJohnson54 in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 02-10-2012, 01:47 PM
  2. New spark Plug wires
    By Dan929CDX in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 4
    Last Post: 05-16-2011, 01:05 AM
  3. Spark plug wires.
    By Discobaywa in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 07-22-2010, 03:11 AM
  4. Carbon dust buildup on plug wires
    By fishnut in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 12-09-2006, 12:40 PM
  5. spark plug wires
    By Lojack in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 08-05-2005, 05:23 PM