Thread: cranking amps

Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Jan 2005
    Location
    Reidsville
    Posts
    56

    cranking amps

    Need minimum cranking amps for JOhnson 150 fast strike. Thanks

  2. Member
    Join Date
    Sep 2004
    Location
    andover
    Posts
    391
    #2

    Re: cranking amps (wmaybin)

    My manual says 500CCA (620 MCA) 90 minutes reserve capacity. I have a 96 150 faststrike.

  3. Member
    Join Date
    Jan 2005
    Location
    Reidsville
    Posts
    56
    #3

    Re: cranking amps (t-bone)

    Thanks T-Bone, thats what I needed to know. I don't have a manual for mine. Let me ask you one other question, do you run your vro or do you pre mix? If you pre mix what ratio? Thanks

  4. Member
    Join Date
    Sep 2004
    Location
    andover
    Posts
    391
    #4

    Re: cranking amps (wmaybin)

    I use the VRO. If you want to pre mix use 50:1 ratio. Check with the mods here about the procedure on disconnecting the pump. The new OMS (VRO) pump is very reliable. Also, I would upsize the battery a bit if you run electronics and livewells alot.

  5. Member
    Join Date
    Jan 2005
    Location
    Reidsville
    Posts
    56
    #5

    Re: cranking amps (t-bone)

    Ok, VRO already diconected when I boat the boat. Thanks for your help man.

Similar Threads

  1. 2005 Etec 225 HO & Cold Cranking Amps
    By madtackle in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 09-21-2009, 12:00 PM
  2. Minimum Cranking Amps for older Evinrude
    By Sacto John in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 03-28-2007, 05:38 PM