Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Jun 2004
    Location
    Birmingham
    Posts
    1,411

    115 intruder vs standard 115

    On a 1997 115 Intruder, what was different to it vs a standard 115 ? ...........

  2. Member MIKER2702's Avatar
    Join Date
    Jun 2004
    Location
    maryville
    Posts
    2,220
    #2

    Re: 115 intruder vs standard 115 (Rmart30)

    i think a few more rpm up to 6000 i believe
    i had a faststrike and have the sales catalog from 1995
    if i remember that was it ??
    1998 bullet 20xd 2006 225 sport xs

  3. Member
    Join Date
    Dec 2004
    Location
    Pearland
    Posts
    1,194
    #3

    Re: 115 intruder vs standard 115 (Rmart30)

    My friend had a '97 Evinrude 115. I was not aware that there was an intruder version. He said that his was like an intruder, comparing it to the bigger V6s.

  4. Member 302w's Avatar
    Join Date
    Jun 2004
    Location
    Houston
    Posts
    5,769
    #4

    Re: 115 intruder vs standard 115 (brianalan)

    The intruder/fastrike 115's were identical to the V6's except the 2 extra cylinders. The standard 115 is a crossflow with a 90 degree block. The crossflow tops out about 5500 rpms and the truder tops out near 6000 rpms.
    Burning the candle at both ends.

  5. Member
    Join Date
    Dec 2004
    Location
    Pearland
    Posts
    1,194
    #5

    Re: 115 intruder vs standard 115 (302w)

    I do not think the '97 was a 90 degree. It was a 60.

Similar Threads

  1. 175 Intruder ?
    By scotty34 in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 01-14-2012, 06:46 PM
  2. "HOT" 150 Intruder
    By meatballs9 in forum Evinrude/Johnson Motors
    Replies: 7
    Last Post: 09-01-2011, 06:00 PM
  3. 98 115 Intruder LU Oil??
    By BassinButcher in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 03-02-2011, 05:19 AM
  4. Need help with intruder
    By kcbillo in forum Evinrude/Johnson Motors
    Replies: 7
    Last Post: 08-26-2007, 03:17 PM
  5. 150 Intruder ?'S
    By Frankb in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 01-10-2006, 11:35 AM