Do you guys think a 26 would be better than a 27 tournament loaded on a 20xd with a 225 supermag? I can turn 6600 rpms now at 1.25 above pad with ten inches of setback. That is by myself with half a tank of gas.
Do you guys think a 26 would be better than a 27 tournament loaded on a 20xd with a 225 supermag? I can turn 6600 rpms now at 1.25 above pad with ten inches of setback. That is by myself with half a tank of gas.
The TXP's can run a little stiffer then stamped, what prop are you running up to 6600? Also are you thinking about a 3 or 4 blade?
I have the 27 now. But I was thinking with another man and his gear the 27 would be too much.
4 blade
i have a 26 trophy on my 20xd with 280 runs low 90s but had the 27 txp on it gps one guy 101 2 guys 96 this motor is for sale or trade
You turning 6600 with the 27? I ran a 27 txp ot4 on my rig(20xd/225x) and it was to stiff. I wanted to run a 26 but went back to a performer.
Yes I am turning the 27 6600 that's solo loaded less than half tank of fuel.
I think you'll need a 26p loaded to fish with 2 people from your RPM's, or just take your 27p down to Billy Eaves since you are in Dayton and have him make some adjustments for you. He's as good as they come.
Thanks guys!
Reply With Quote