Powerpole

[zip]

Anyone have a powerpole mounted on their Bullet, if so what adapter plate did you use?, Can you post picture?
Thanks

[hyperflow]

kinda a lil off topic but i noticed your from ontario.Not meny bullets here, what boat/motor u got?

[SUSHII]

Check these out. No pics but I've seen them and they are sweet


http://www.bbcboards.net/zerot...90279

[Hydrilla Gear]

I have a power pole mounted on my Bullet. I am a Power Pole dealer. I have designd a mount specifically for Bullet boats. Just shipped one to Canada the other day as a matter of fact. My bracket is a simple 10 minute install and comes powdercoated black. I will dig up some pictures. Feel free to call me if you have any questions. 561-926-2664-Rich

[Hydrilla Gear]

This is a picture of the bracket mounted to the boat. The 10' Arm you see coming off of the bracket is actually part of the power pole. In other words, this arm will come WITH the power pole.




Modified by Hydrilla Gear at 4:55 PM 3/11/2011

[zip]

Thanks, Awesome pictures, my only concern. When you turn right does the motor rub up against the powerpole? I have a Blazer and it seems a little tight to mount one.

[Hydrilla Gear]

no it will not. You have to keep in mind that in this picture the motor is raised all the way up on the jack plate fro trailering. When the motor is down in running position you can turn full sweep and not hit pole. You cannot trim the motor all the way up out of the water and turn hard right. As far as this working on your BLazer, I would have to see pictures.

Rothwell Marine just finished this install




Modified by Hydrilla Gear at 4:56 PM 3/11/2011

[zip]

Okay,
Thanks HG I will try to post some.

[hyperflow]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by zip &raquo;</td></tr><tr><td class="quote">Okay,
Thanks HG I will try to post some.</td></tr></table>

blazer 202 with a 250xb?

[marty92xrd]

Like Rich said, we just installed the one in the last set of pictures and it turned out GREAT!! I like how it stays tucked inside the sponson, rather than coming out and behind the sponson.

[zip]

Do you think this will work on a Blazer?

[zip]

Sorry Hyperflow I didn't notice your post....202 with 225h.o

[poorboy20xd]

would that same bracket work for a talon

[Hydrilla Gear]

As far as working on a Blazer I would have to see pics and maybe verify some measurements. I know the back of both the blazer and bullet is very similar.. Chances are pretty good it will work.

As far as mounting a Talon to this my bracket, Yes the hole pattern is the same.

[haulingbass]