Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Jul 2009
    Location
    madison
    Posts
    4

    Will this prop work?

    Will this prop work good on 20 vee. 225 promax
    http://forums.screamandfly.com...10923

  2. Member Largemouthlou's Avatar
    Join Date
    Jun 2004
    Location
    Palm Bch Gardens FL
    Posts
    24,236
    #2

    Re: Will this prop work? (blalock3)

    It is really hard to anwer that ? due to the fact all boat, motors and props are different..

    The pitch is right, and it is a chopper style prop, I'm guessing you have a sportmaster lower.. and are running above the pad, so it cold work for ya or be worked into a prop that could work for ya by a prop man..


    Not much help I know but props will drive ya crazy for sure

  3. Bullet Country
    Join Date
    Jul 2008
    Location
    Lynchburg, Tn
    Posts
    863
    #3

    Re: Will this prop work? (Largemouthlou)

    Depends on what you want out of a prop. I assume you have a sportsmaster.

    I will be a great topend wheel.....but you'll bang the limiter if you have the stock 6750 limiter.

    It WILL NOT carry a fishing load.

  4. Member tmbullet's Avatar
    Join Date
    Dec 2009
    Location
    Gregory
    Posts
    3,915
    #4

    Re: Will this prop work? (blalock3)

    Only if you have a sportsmaster gearcase. I have tried one on a torquemaster and It does not work good at all!!!

  5. Member
    Join Date
    Jul 2009
    Location
    madison
    Posts
    4
    #5

    Re: Will this prop work? (jowens)

    Thanks for the replys, if you don't think it will carry a load I'll keep looking.Right now it has a 26 chopper hittng stock limiter at 82 mph, just after a little more.

  6. Bullet Country
    Join Date
    Jul 2008
    Location
    Lynchburg, Tn
    Posts
    863
    #6

    Re: Will this prop work? (blalock3)

    It won't carry a fishing load.

    IT will carry the boat empty and setup for top end.


  7. Member
    Join Date
    Sep 2004
    Location
    Henderson, Ky
    Posts
    4,326
    #7

    Re: Will this prop work? (jowens)

    If you have the factory limiter still on the motor...you will be all over the limiter at about 86 light. For a speed prop with limiter at 6750...you will need a strong 30 to a 31" prop.
    http://www.bbcboards.net/avatars/longrodder.gif?type=sigpic&dateline=1383747738

Similar Threads

  1. Prop work
    By Jusaddwata in forum Louisiana Fishing
    Replies: 39
    Last Post: 08-04-2011, 04:39 AM
  2. What prop would work best?
    By skeeter400 in forum Stratos/Javelin Boats
    Replies: 10
    Last Post: 11-28-2009, 10:13 AM
  3. Will this prop work ??
    By dlewis10 in forum Champion Boats
    Replies: 2
    Last Post: 07-01-2009, 03:33 PM
  4. Prop work
    By Travis in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 07-07-2005, 10:12 AM