behold my....

[3 Numbers]

Kevin Taylor Lightening ET 28P/14.5D

[Blue Steel]

Now that is Baddazz

[21XDC]

Wonder if I could turn it?

[colreb2000]

Sweet

[craigs06]

Very nice, I like the blasted outline. Pimpin'

[Largemouthlou]

Now THAT is a different design ET!!!!!!!!!!!!!! Waiting on the #ers Buddy!!

[marty92xrd]

Looks good!!!!!

[Radar66]

That's purdy, Let us know how it runs.

[SUSHII]

That's sick looking

[sgt93]

Looks like a weapon Very nice

[1outlaw]

Sweet!!!!

[dkb0420xd]

Buddy, Thanks for sharing !! That is 1 bad azz looking wheel, let us know how it performs !!

[Hydrilla Gear]

if it runs as good as it looks you should be good

On the other hand i have seen some sweet lookin wheels that would be better off used as a hitch decoration.

Who is Kevin and does he have a history? I am always lookin for a prop guy.

[250XDC]

WOW

[racerkvn]

Bad azz wheel Buddy!! Let us know how it does!

[3 Numbers]

That actually is the 1st prop I bought for my 280 and 20cc years ago. I decided to play with my ET props this fall after the yacht traffic slowed to see what difference it made going f/ 8” to 12” setback. That prop always ran good and w/12” you can really feel it accelerate as it hooks up when it starts surfacing the prop and gets up on the pad. It doesn’t slip at idle on mine like an ET 28P14D does. The extra 1/2"D and modified blades seem to make quite a difference. It doesn’t have much cup either, but the edges are scored. It has the hub built into it, so doesn't need the plastic thingy. It’s a real nice one!

Kevin Taylor @ R&R Prop Shop outside of Las Vegas made it. He is an outboard enthusiast and recently won his class in a 300 mile/3 stage endurance race on the Colorado River. Super nice guy.

http://www.randrpropshop.com/

[AfterLife]

now that is a sweet looking prop

[Skeeter Boy 181]

wow looks sweet,Wonder if i could turn it

[bamabullet]

I am jealous

[This is Double J]

Fantastic looking prop. I ran one once with my 225X. Fastest prop I ever ran w/ that mota. I also ran a 30 Pitch. You could turn it MIke, w/ no problem!!