I am having some problems getting the rear of the cap seperated from the hull. The front is free and clear and moving but I have something holding the rear still and I can't figure out what it is. Any thoughts would be appreciated![]()
I am having some problems getting the rear of the cap seperated from the hull. The front is free and clear and moving but I have something holding the rear still and I can't figure out what it is. Any thoughts would be appreciated![]()
SUSHII
21XRS/SHO
Lou will get you fixed up on this, he just went through it.
It seems to be hung up near the transom itself
SUSHII
21XRS/SHO
Wait for Lou, he is the best man for that job probably.
use a crobar and a 4lb mall. i won't mind coming do it![]()
20XRD COMP/300X![]()
Have you seperated the stringers from the live well and storage walls, also the bottom of the rear storage compartments bottoms are glassed to the hull.
There is also glass under the top cap at the transom that needs to be ground out..
Sent ya an IM with my #er call me tomorrow and I will go over everything with ya I can, too much to type..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bayou bullet 20xd »</TD></TR><TR><TD CLASS="quote">use a crobar and a 4lb mall. i won't mind coming do it</TD></TR></TABLE>
I'll bring my Sawzall.![]()
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rebel1 »</TD></TR><TR><TD CLASS="quote">
I'll bring my Sawzall.</TD></TR></TABLE>
I used all of the above as well as a 4" grinder with a cut off wheel!!
Had the chainsaw in the transom last weekend![]()
SUSHII
21XRS/SHO
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KRAMER 21XD »</TD></TR><TR><TD CLASS="quote">Had the chainsaw in the transom last weekend</TD></TR></TABLE>
Dang Sushi!!!!!! I thought we was the only ones that did that!!!!!!!![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by marty92xrd »</TD></TR><TR><TD CLASS="quote">
Dang Sushi!!!!!! I thought we was the only ones that did that!!!!!!!![]()
![]()
![]()
![]()
![]()
![]()
![]()
</TD></TR></TABLE>
seemed like the only rational option to me.
SUSHII
21XRS/SHO
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RogerR »</TD></TR><TR><TD CLASS="quote">Need help????</TD></TR></TABLE>
Nah it is going to be a long drawn out process. Since I bought the 21 I can't seem to stop fishing enough to work on it![]()
![]()
![]()
SUSHII
21XRS/SHO