Thread: 300xs

Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Aug 2009
    Location
    Monroe
    Posts
    6

    300xs

    What is the best fishing set up for a 21xd with a 300xs,props and transom height and a top end set up ,stripped boat.

  2. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,442
    #2

    Re: 300xs (windemerepointe)

    1.62 gears? A worked 30P Bravo1 with dual pvs holes by Mark Croxton.

    Even with the pad I'd say with a sportmaster.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  3. Banned
    Join Date
    May 2007
    Location
    Fayetteville
    Posts
    7,718
    #3

    Re: 300xs (21XDC)

    I agree with Mike on Props, but I'd say 1.5-1.75" above pad with a sporty.

    I had a 21XRD with the same prop and motor, and ran it at 1.75"

  4. Member
    Join Date
    Jan 2005
    Location
    florence al.
    Posts
    95
    #4

    Re: 300xs (Sneezy Beltran)

    If you're running a 14" jackplate you probably can run 1.5" above pad for fishing with the Bravo or Hydromotive OB lV If you're talking about running lite for top end a 32 pitch performer 3 blade 1 1/2" to 1 3/4" above pad. Watch and be sure you have at least 12 psi water pressure wot AND when making turns on the water.

  5. Member 70 Mach 1's Avatar
    Join Date
    Nov 2008
    Location
    Gilmer, Tx
    Posts
    956
    #5

    Re: 300xs (jimmydoolittle)

    I fish with a 30 Bravo at 1.25" above (propshaft to pad not nosecone to pad) and my topend wheel is a 30 Performer 4 BC at 1.75" above.

Similar Threads

  1. 250 Pro Xs or 300XS
    By alabamaphoenix in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 5
    Last Post: 12-06-2011, 12:39 PM
  2. 300XS
    By 55excl in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 2
    Last Post: 07-05-2009, 04:30 AM