SET UP HELP

[welder81]

I just bought a 2001 Bullet X20 DC with a 250 pro xb has a 26 chopper prop and 15" jackplate will run like a scalded dog only thing is it comes out of the hole kind of slow but when it comes over its gone how do you check and see if the motor is to high or to low

[21XDC]

Get a worked/vented 28 bravo1 and use that prop for a spare.

[Largemouthlou]

Alan, I answered you IM befor I read this,,

If ya have a local prop shop they may be able to work hole shot into the chopper for ya, the Bravo or Performer3 series are both great props when worked for your rigm if your looking for another prop..

Here are some good reads ta get ya started,,

http://www.bassboatcentral.com/supertips.htm

[welder81]

thanks for the help

[marty92xrd]

Is that boat kind of burgandy colored and came out of Little Rock? Does it still have the Torquemaster lower unit or does it have a low water pick up lower unit on it?

You can give us a call at the store anytime you would like if you have any questions, might be able to help you a little bit. 870-777-6180