Looking for Published Dimensions for E-TEC 200, 200 H.O. and 225

[andygere]

Does anyone have any dimensioned drawings or specs that give the physical dimensions of the 2.6 liter 200 and the 3.3 liter 200/225? I'm trying to sort out if there will be clearance problems with some aftermarket rails on my boat with the outboard tilted for either of these motors. I haven't found anything on the BRP site.

[SEAHORSE]

I don't have any drawings that would help you, but the ABYC sets the industry standards for boat transom well dimensions and there may be a drawing somewhere on their site, ABYC.org, that can help you. The transom drawing shows the minimum sizes of a transom well so that any outboard will fully tilt and pivot without hitting anything.

Let us know if you find one and share it with us.

[John from IL]

Starting with the 2005 model year the dimensional line drawings or profile drawings are published in the parts catalogs. I'm refering to the paper catalogs, the drawings don't seem to be in any electronic parts catalog I've seen.

-John